For many years engaged in electroplating wastewater treatment operations experts are well aware: the supervision of raw water in place, is the key electroplating wastewater treatment compliance. Take a plating base in Huizhou, Guangdong as an example, a variety of existing problems make the base of raw water monitoring resource allocation is still lacking. Set aside controversy, to avoid problems, the other way is not a solution, then there is no direct response to a variety of existing problems, to achieve raw water monitoring in place to solve it? Electroplating wastewater treatment is a major environmental projects. Electroplating wastewater treatment plant to wastewater treatment as the core, in order to achieve the goal of emissions. Taking a certain electroplating base in Huizhou, Guangdong as an example, in order to ensure that the discharge of electroplating wastewater meets the discharge standards, the pollutants in the wastewater from the base mainly include heavy metals (copper, nickel, chromium, zinc and lead), cyanide, chemical oxygen demand , Ammonia nitrogen, total nitrogen, total phosphorus, fluoride and so on, using qualitative and specific targeted treatment; electroplating wastewater copper, nickel and other heavy metals for recycling, and electroplating wastewater treatment plant project overall upgrading. Raw water monitoring is the top priority in wastewater treatment. In other words, the supervision of raw water in place, is the key to electroplating wastewater treatment compliance and cost control. As the name implies, raw water supervision is mainly to carry out supervision and inspection on discharge sources of electroplating wastewater (divided into general wastewater and high-concentrated wastewater) in the park, supervise and inspect the abnormal discharge of waste water discharges and mixed discharges within a specified period of time and so on. The content and nature of this work put forward higher requirements on the overall quality of the raw water supervisory personnel, that is, they must have a comprehensive understanding of the wastewater treatment processes, processes, equipment and technologies, and clarify the relevant national and local regulations on the discharge limits of various types of wastewater Regulations, but also know some of the most conventional and basic test methods, data statistics, scheduling, check points and record standards, but also with the boss, the production site at all levels responsible for long-term dealings with good psychological quality and skills Wait. Unfortunately, the important role of raw water monitoring failed to show. Take a certain electroplating base as an example, a variety of existing problems, making the base in the allocation of resources for raw water monitoring is still lacking. First, the establishment of workplaces and the ownership of rights and responsibilities, due to the original water supervisory staff to deal with enterprises for a long time, and the supervision of raw water and workshop waste (waste gas, solid waste, noise) management is closely related to the original water superintendency of the first comprehensive management department, Raw water supervisory staff to deal with business as an integrated manager. Since June 2015, raw water supervision has been assigned to wastewater treatment plants due to the need of corporate restructuring. From January 2017 to January 2017, the waste water treatment plant affiliated to the base is the first to conduct a performance appraisal. During the process of formulating and adjusting performance appraisal standards, the raw water supervision is once again assigned to the general management department. The ownership of raw water supervision is unclear, and it is unfavorable to the enthusiasm, sense of belonging and responsibility of the supervisory staff of raw water. Second, in staffing, the supervisory staff of raw water is mostly supplemented by new employees. These newly recruited workers are mostly inexperienced in wastewater treatment and have not received any pre-service training from wastewater treatment professionals. They are mostly familiar with the environment, know the situation, wait for a while to get started and then transfer to other positions. This situation has led to the shortage of manpower in the supervision of raw water, the large mobility of staff, the low skill level of qualified personnel and the shortage of experienced supervisory staff of raw water. Thirdly, in terms of remuneration and working environment, the supervisory staff of raw water has a poor working environment and has to work at least five times a day during work hours, and as many as 10 or more enterprises' production workshops go through the source of discharge of waste water. In addition to routine inspections, weekly, monthly and quarterly inspections should be carried out from time to time in conjunction with the integrated management department for safety production and cleaner production. This task determines the raw water supervisors work hard and dangerous. However, the remuneration packages for the supervisory positions of raw water are not much competitive and attractive to other integrated management units and other wastewater treatment plants at the same level. Fourthly, on performance incentives, once the raw water monitoring is re-assigned to the integrated management department, it is balanced with the performance incentives of personnel in charge of park gas, solid waste, highly toxic chemicals, workshop safety and fire safety. The problem of raw water monitoring is so obvious that the base is inclined to make use of technical means and mobilization of non-human resources to remedy the problem of raw water monitoring in order to achieve the supervision of raw water. First, the source of electroplating wastewater discharge placed on-line monitoring device. The use of visual control of the central control management system, through the network communication, the raw water quality monitoring system, wastewater treatment plant process segment control system, video surveillance system integration to see the operation of the various sections of the operating conditions, such as water treatment, technology Control parameters, equipment health and so on. The second is to establish a high-concentration wastewater treatment plant pretreatment area, the workshop of high concentrations of waste water collection, storage, transportation to the waste water treatment plant for processing, which solved the workshop of high concentration of waste water storage problems, improve the transfer rate of waste water to complete The high concentration of waste water collection, improve work efficiency and improve the operating environment. Four Roller Rolling Machine,Four Roller Mill,4 Roller Rolling Machine,Four Roller Bending Machine Nantong Fengli Machine Tool CO.,LTD , https://www.jsfltech.com