Misuse of lubricants: Misconception 1: Lubricants can be added more The amount of lubricant should be controlled between the upper and lower tick marks of the oil dipstick. Because too much lubricating oil will enter the combustion chamber from the gap between the cylinder and the piston to form a coke combustion. These coke deposits will increase the engine compression ratio and increase the tendency to produce knocking. Coking in a red hot state in the cylinder will also cause premature combustion. If it falls into the cylinder, it will increase the wear of the cylinder and the piston, and it will also accelerate the pollution of the lubricant. Secondly, too much lubricating oil increases the stirring resistance of the crankshaft connecting rod, which increases the fuel consumption. Misunderstanding 2: When the lubricating oil turns black, it is time to change the oil. This understanding is not comprehensive. For lubricating oils that do not add clean dispersants, the darkening of the color is indeed a sign that the oil has been seriously deteriorated, but the lubricants used in Hyundai Motors are generally added with detergents. The detergent removes the adhesive film and black coke adhering to the piston and disperses it in the oil to reduce the formation of high-temperature deposits in the engine. Therefore, after the lubricant is used for a period of time, the color tends to become black, but this time The oil has not completely deteriorated. Misunderstanding 3: Lubricants often add no change Regular inspection of lubricants is correct, but supplementation without replacement can only compensate for the lack of oil, but it cannot fully compensate for the loss of lubricant performance. During the use of lubricating oil, the quality of the lubricating oil will gradually decrease due to pollution, oxidation, etc. At the same time, there will be some consumption and the quantity will decrease. Misunderstanding 4: Large use of additives A truly high-quality lubricant is a finished product with a variety of engine protection functions. Formulations already contain a variety of additives, including anti-wear agents, and lubricants are the most balanced formulas to ensure full performance of all kinds of performance. Adding other additives on their own will not only bring additional protection to the vehicle, but will also react with the chemical substances in the engine oil, resulting in a decline in the overall performance of the engine oil. Desktop Vacuum Forming Machine
vacuum forming is easily one of the most fascinating forms of manufacturing for the non-technical crowd due to its relatively simple process: heat plastic and pull it around a shape to create multiples of that shape.
Desktop Vacuum Forming Machine is with 3 different series, with different functions, forming height for choose.
Desktop Vacuum Forming Machine, Homemade Vacuum Forming Machine, Vacuum Thermoforming Machine, Desktop Thermoform Machine Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.hfweldingmachinery.com
Can be applied for forming Acrylic, ABS PET PP EPS PVC PETG, etc, widely used in automotive and aerospace R&D, sign and display companies and film & theatre set design.