1. The incinerator Description About the waste incinerator is a kind of machine with compact size, high burning efficiency, reasonable burning technology, high degree of non-harm etc, it is an ideal choice for waste treatment of hospital, hotels, various stations and industries. 2. About the incinerator equipment Advantages 1) Long lifetime 2) Totally enclosed operation 3) Suitable for treating infectious waste 4) Avoid secondary pollution 5) Simple operation 3. About the incinerator equipment Main features 1) Both gas-motivated and oil-motivated are all can be preferred according to customers' needs. 2) Gasified incineration is used for burning syringe, paper waste, bandage, absorbent cotton and other medical wastes. 3) Daily waste can be burned once by gasified incineration. 4) Gasified incineration, mixed incineration and burnout treatment ensures low emission standard of dust (lower than International standard). 5) Totally enclosed operation is suitable for treating infectious waste to avoid secondary pollution. 4. About the incinerator Application Hospital, Station, Hotel, Farm,Shopping Mall, etc.---Soild waste (garbage, rubbish). Features: 2. 100% low excess air coefficient, using vortex combustion process. 3. Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling. 4. Cover an small area , simple operation, convenient maintenance. Why choose us : 1, Are you manufacturer? Yes, we are manufacturer with more than 15 years' experience. 2,Can you ship the machine to my address? Yes, we could use DHL to express the machine. While transport cost will be higher than by sea. 3, Where are you? Can we go to China and visit your factory? Yes, of course. We are in Shandong, China. Welcome to our factory. 4, Do you have manual with the machine? Yes, of course. It is in English version. 5, Can you offer us the necessary paper to do the customs clearance? Yes, of course. We will send you the commercial invoice, sales contract, packing list, bill of lading(FOB or CFR, CIF terms), insurance policy (if CIF terms), also CO if you need. Jane Wei Weifang Zhite Environmental protection technology Co.,Ltd. Address:Dongsi Road,Dongcheng development zone,Linqu,Weifang city,Shandong province,China. Website:http://wfzthuanbao.en.made-in-china.com/ Mol:8618162085975
FRP/GRP flange:
FRP flange adopt contacted mold process, flange dimension depends on customers` requirements.
moulds for GRP/FRP pipe/tank:
1 Tank steel moulds: DN600~DN4000mm
FRP/GRP tank for HCL storage:
FRP/GRP tank be produced by computer control filament winding process, use different resins and fiberglass to satisfy client`s requirements.
FRP pipe, gas pipe for mine:
Properties: light weight, high strength, corrosion-resistant, smooth inner surface, good hydraulic property, good insulation, ageing-resistant, etc.
FRP/GRP absorption tower:
We use vinyl ester resin and fiberglass for material and filament winding for process in FRP gas absorption column production to sustain best quality performance. This purification tower adapts many types of equipment which are used for disposal of unhealthy waste gas. It's not only widely used, but also high efficiency of purification. Its equipment resistance is low (400-600pa), cost of operation is low. GRP FRP Pipe,Frp Grp Pipe Fiberglass Tank,FRP Pipe Gas Pipe for Mine,FRP Pipe Tank HEBEI SENUF MANUFACTURE AND TRADE CO., LTD , https://www.senufmetals.com
OverviewÂ
1. This equipment is a kind of suitable for the hospital medical waste, life rubbish, dead animals, the villages and towns of urban garbage disposal and so on various aspects non-hazardous wastes treatment equipment.
2. Â Simple and convenient operation, high burning temperature and burning of organic matter removal rate was 99%, Fast burning speed, effectively.Covers an area of small, low cost, low malfunction,easy maintenance.
Product parameters:
Â
Model
ZTFS-25
ZTFS-20-25
ZTFS-20-60
ZTFS-20-120
ZTFS-150-400
Burning objects
Dog/cat(pets)
Mouse/rabbit/monkey/dog
Chicken/duck/goose/bird
pig
pig/horse/cow
Processing capacity(kg/batch)
25
20-25
20-60
20-120
150-400
Volume(m3)
2.5
2.5
3.0
8.0
16.0
Power consumption(kw/h)
2
2-4
2-5
3-12
15-50
Fuel consumption(L/h)
3
3-10
3-12
4-15
20-60
Equipment size(mm)
2500*1500*1400
2300*1200*2100
2200*1300*2300
2500*2300*3000
3000*4000*2800
Weight(t)
1
3-8
4-8
4-12
15-45
Incineration system:
1.Furnace body is made up of refractory materials, insulation materials, insulation materials,   laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and    the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station.
2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances.
3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and Building Materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials.
Product picture
Specifications:Â Â
1. Competitive price/reliable qualityÂ
2. Suitable for Medical Waste,Dead Animals,living garbage,etc.
3. High working efficiency Â
Product description:
Incinerator operating process:
1.Turn on the power switch, the power indicator is on.
2.Open water pump, return pipe yielding water, turnon the oil circuit switch.
3.Open the incinerator furnace door,fill into the flaming material, small living garbage          incinerator, then close the door.
4.Turn on the induced draft fan.
5. Turn on the burner ignition switch.
6.When burnt out, turn off the burner ignition switch.After the temperature dropped to 50       degrees,turn off the oil circuit switch,the induced draft fan and the water pump, shut off the   main power supply, open the door, remove the residue, clean it.
Special instructions, the operating process are strictly prohibited under the condition of high temperature shut down the pump and the burner fan.
Advantages:Â
2.The device is fully enclosed, small volume, high burning efficiency, reasonable process, leading technology, high degree of harmless, etc, are all kinds of hospitals, hotels, railway stations, large commercial institutions, enterprises and institutions ideal garbage treatment equipment.
Company Brief Introduction:
Our company supplies different kinds of products. High quality and favorable price. We're pleased to get your Inquiry and we will come back to as soon as possible. We stick to the principle of " Quality first, service first, continuous improvement and innovation to meet the customers" For the management and " Zero defect, zero complaints" As the quality objective.
Factory pictures:
Matters need attention
1.The incinerator need to be  torrefaction for 36hours before use,can not with open fire.
2.The incinerator shell can only be cleaned with mixed liquor which is mixed by water and Detergent.
3. This equipment must be installed in a well-ventilated room, appliances and burner anti-collision moistureproof.
 After sale service?Â
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.Â
Packaging &Â Shipping
All the goods exported are packed in wooden case or carton with export standard except naked package when necessary.Â
We have our own professional shipping company which could deliver the goods to every corners in the world with safety and speed, and aslo can supply the services of solving the problems occured during the transaction, such as customs cleaning. 
Our Main products:
1.Incinerator
2.marine incinerator
3.Medical incinerators
4.Hospital use incinerator
6.Garbage incinerator
7.Pet incineartor
8.Waste incinerator
9.Small incinerator
10.Gas Generator
11.Dead animal incinerator
12.medical waste incinerator
13.living garbage incinerator
14.crematorium the incinerator for cows
15.gabage treatment incinarator
16.medical waste diesel incinerator
17.solid waste incinerator
18.industrial incinerator factory
Contact way:
FRP elbow
FRP tee
FRP reducer
FRP slip-on flange
FRP fittings
2 Pipe steel moulds: DN25~DN2500mm
3 Flange steel moulds: DN25~DN1000mm
4 Elbow steel moulds: DN25~DN300mm.
corrosion-resist, inner liner resin-rich layer, suitable resin be selected depends on different mediums, resin content is 90%.
Smooth inner surface, the roughness coefficient is 0.0084, easy to clean.
good sanitary property, foodgrade resin can be used for foodstuff, brewing etc industries.
Easy to form different shape, can match different accessories, like handrail, ladder, level indicator etc.
`s be widely used for chemical, power, dyeing, metallurgy, petrochemical, seawater desalination, fume desulfurization, waste gas treatment etc different industries.
Application: gas drainage under mine, water supply and drainage under mine, prospecting water hole pipe, etc.
Specification: DN10~DN4000
Pressure class: 0.25,0.6,1.0,1.6,2.0,2.5MPa
Type of pipeline joint: flanged joint, slip-on flanged joint, spigot and socket joint, etc.
Length of single pipe: 6m, 12m, or custom-made according to customer`s requirements.
Advantage
1.High mechanical strength ,temperature and corrosion resistance
2.. Small resistance, low energy consumption
3. high purification efficiency ,stable performance and applicable range
4. Simple structure and light weight, easy to transport and maintain
Incinerator for Dead Animal/Pets/Living Garbage/Medical Waste/Marine Waste
Model NO.: ZTFS-20-60
Burning: Chicken/Duck/Goose/Bird/Waste/Medical Waste,etc.
Processing(Kg/Batch): 20-60
Volume(M3): 3.0
Power Consumption(Kw/H): 2-5
Fuel Consumption(L/H): 3-12
Size(mm): 2200*1300*2300
Weight(T): 4-8
Subject Range: Medical Waste,Dead Animals,etc.
Trademark: ZTHB
Transport Package: with Wooden Box
Specification: ZTFS-20-60
Origin: Shandong, China
HS Code: 8417809090
Factory directly supply Incinerator for Dead Animal/Pets/living garbage/Medical waste/Marine waste1. Primary combustion chamber temperature 650 ~ 850 ºC, fuel completely ashing, reduced capacity more than 97% or higher;The furnace heating up fast, fuel consumption, burning full.