The difficulty of CNC machining copper parts is between that of machining steel parts and aluminum parts. Because copper has good electrical conductivity, good corrosion resistance and good processing performance, copper parts are also widely used. For some relatively single-process copper parts, CNC machining is often used, such as copper sleeves, copper nuts, copper columns and coaxial, etc., all belong to CNC turning. Of course, there are many other copper parts that use CNC milling machining or CNC turning and milling machining.
SCZY has rich experience in precision CNC machining of copper, aluminum, steel, stainless steel, titanium alloy, molybdenum alloy, etc., and can select reasonable parameters and edit reasonable tool paths according to the material and product structure, so that the product can achieve the best Effect. Moreover, our machining accuracy can reach ±0.01mm. If higher accuracy is required, we can also meet the requirements through outsourcing processing. We can guarantee our quality and service.
Brass Precision Machining,Brass Lathe Machining,Copper Cnc Machining,Brass Cnc Lathe Machining,Brass Precision Machining Services Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com
Prev:An earthquake of magnitude 5.4 on the Richter scale in Hualien, Taiwan 
Liaoning will once again bring rainstorms to the Yalu River
Liaoning will drop storm again Yalu River flood control situation tightened diesel generator | diesel generator price / 2010-08-22
The reporter learned from the Liaoning Flood Control and Drought Relief Headquarters that, according to the weather forecast, from 21 to 23 o'clock on the night of the 21st, Liaoning will once again experience a heavy rainfall process. Dandong and other regions may reduce heavy rain to heavy rain, and the local rated rainfall will reach 250. Millimeters, putting more pressure on flood prevention. In addition, the Shuifeng Reservoir is unable to peak in maintenance, and the Yalu River flood control situation is very severe.
New water monitoring shows that the water potential of the rivers in the Yalu River basin continues to fall. By 20 o'clock on the 21st, the peak flow at the Arrei Hydrological Station on the main stream of the Yalu River has dropped from 9,930 cubic meters/second at 14:00 to 6,820 cubic meters/second. According to the analysis of Liaoning Province's total defense, according to the weather forecast, on the morning of the 21st to the 23rd, there will be heavy rain and heavy rain in Dandong, Benxi, northern Dalian and southern Anshan. Precipitation will last for a long period of time in the future and the rainstorm will be distributed widely. . In particular, the Shuifeng Reservoir on the upper reaches of the Yalu River still cannot play its role in peak regulation. If the time between the new round of precipitation and the previous precipitation is short and the intensity is high, the flood control situation in the downstream of the Yalu River will become even more tense. At 14:00 on the 21st, the water storage capacity of the Shuifeng Reservoir was 7,678 cubic meters per second and the discharge flow rate was 3,469 cubic meters per second.
The relevant departments in Liaoning Province continued to strengthen the monitoring of rain and flood conditions, issued early-warnings in time, and took timely response measures.
Next:Installation, use and regulation of marine diesel generator sets