Liquid Turbine Flow Meter for Water, Oil, Fuel, Gas

Model NO.: TUR Series
Measuring Media: Liquid
Measuring Principle: Mechanics
Measurement Object: Closed Pipeline
Certification: GB, CE, ISO
Medium Available: Liquid; Gas
Accuracy Class: 0.5%F.S - 1.0% F.S
Repeatability: 0.2% F.S
Ambient Tempt.: -10 to +55 (Deg. C)
Working Tempt.: -20 to +110 (Deg. C)
Signal Transmission Distance: Max. 1,000m
Output: 4-20mA; Pulse Output: Modbus RTU RS485
Power Supply: 24V DC; Lithium Battery
Explosion Proof: Exd Iibt6
Protection Class: IP65
Trademark: Tosilon
Transport Package: International Export Carton Packing, Water Proof
Specification: CE
Origin: Shaanxi
HS Code: 902920900
Turbine Flow Meter | Tosilon Automation
Design and Manufacturing according to CE Standard
Liquid Turbine Flow Meter for Water, Oil, Fuel, Gas (Ex Approved)

Introduction
Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to transmit the signal to other equipment.

Features
· High Stability;
· Good Repeatability
· Convenient Installation / Maintenance;
· Compact Structure Design;
 
Liquid Turbine Flow Meter for Water, Oil, Fuel, Gas
Liquid Turbine Flow Meter for Water, Oil, Fuel, Gas
Technical Specification
Nominal Diameter Standard Flow Range (SFR) Extended Flow Range
(EFR)		 Standard Pressure Rating Customized Pressure Rating
mm in. m3/h m3/h MPa (MPa) - Flange Fitting
4 0.15 0.04 - 0.25 0.04 - 0.4 Thread: 6.3 12, 16, 25
6 0.25 0.1 - 0.6 0.06 - 0.6 Thread: 6.3 12, 16, 25
10 0.4 0.2 - 1.2 0.15 - 1.5 Thread: 6.3 12, 16, 25
15 0.5 0.6 - 6 0.4 - 8 Thread: 6.3; Flange: 2.5 4.0, 6.3, 12, 16, 25
20 0.75 0.8 - 8 0.45 - 9 Thread: 6.3; Flange: 2.5 4.0, 6.3, 12, 16, 25
25 1 1 - 10 0.5 - 10 Thread: 6.3; Flange: 2.5 4.0, 6.3, 12, 16, 25
32 1.25 1.5 - 15 0.8 - 15 Thread: 6.3; Flange: 2.5 4.0, 6.3, 12, 16, 25
40 1.5 2 - 20 1 - 30 Thread: 6.3; Flange: 2.5 4.0, 6.3, 12, 16, 25
50 2 4 - 40 2 - 40 Flange: 2.5 4.0, 6.3, 12, 16, 25
65 2.5 7 - 70 4 - 70 Flange: 2.5 4.0, 6.3, 12, 16, 25
80 3 10 - 100 5 - 100 Flange: 2.5 4.0, 6.3, 12, 16, 25
100 4 20 - 200 10 - 200 Flange: 1.6 4.0, 6.3, 12, 16, 25
125 5 25 - 250 13 - 250 Flange: 1.6 2.5, 4.0, 6.3, 12, 16
150 6 30 - 300 15 - 300 Flange: 1.6 2.5, 4.0, 6.3, 12, 16
200 8 80 - 800 40 - 800 Flange: 1.6 2.5, 4.0, 6.3, 12, 16

Order Guide
TUR               Description (SFR)
Nominal
Diameter		 4             4mm; SFR: 0.04 to 0.25 m3/h
6 6mm; SFR: 0.1 to 0.6 m3/h
10 10mm; SFR: 0.2 to 1.2 m3/h
15 15mm; SFR: 0.6 to 6 m3/h
20 20mm; SFR: 0.8 to 8 m3/h
25 25mm; SFR: 1 to 10 m3/h
32 32mm; SFR: 1.5 to 15 m3/h
40 40mm; SFR: 2 to 20 m3/h
50 50mm; SFR: 4 to 40 m3/h
65 65mm; SFR: 7 to 70 m3/h
80 80mm; SFR: 10 to 100 m3/h
100 100mm; SFR: 20 to 200 m3/h
125 125mm; SFR: 25 to 250 m3/h
150 150mm; SFR: 30 to 300 m3/h
200 200mm; SFR: 80 to 800 m3/h
Type N Basic Type: +12V to +24V DC; Pulse Output
A 4-20mA
B Battery Power Supply with Filed Display
C Field Display, 4-20mA
C1 Field Display, RS485
C2 Field Display, HART
Accuracy Rating 10 1.0% F.S
05 0.5%F.S
Measurable Range S Standard: Refer to table 1
E Extended: Refer to table 1
Housing Material S 304 Stainless Steel
L 316L Stainless Steel
Explosion Rating   Blank: without Ex-proof
E Explosion Proof: Exd IIBT6
Pressure Rating N Standard: Refer to table 1
H(x) Customized: Refer to table 1


For more information, please contact Tosilon
Your Global Partner for Automation
www.tosilon.com

Shredder And Crusher Two In One

Shredder And Crusher Two In One is suitable to treat wooden products, the big, thick of plastic products, such as big diameter plastic pipe, the shell of TV sets, refrigerators and washing machines, tires, plastic packing case, computer hard disk, aluminum, bronze and the thickness of steel less than 5mm.

Feature:

1.main shaft is driven by a gear box, smooth operation, low noise, large torque.

2.Each rotary blade has 4 cutting edges, the wear and tear can be rotated 90 ° to continue to use.

3.knife with small "V" shaped installation, so turn the knife in the whole work cut material evenly, reduce energy consumption, reduce noise.

4. Rotor blades on the knife holder and removable for easy cleaning, maintenance.

Shredder And Crusher Two In One,plastic shredder and crusher,waste plastic shredder and crusher system,Shredder Crusher

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com