Introduction: What kind of steel clamps will you use for the lifting of multi-layer sheets? LP-W Sanmu steel plate clamp is our recommended multi-layer thin plate lifting tool. Let's briefly look at its composition: 4 hooks + 2 connecting rods + 4 hooks. YK series oscillating granulator is mainly consisted of drive motor, feeding hopper, rotor, sieve and discharging chute. Wet mixtures of powders or big granules/agglomerates are fed into the granulating chamber via feeding hopper. The oscillating motion of rotor presses the material through the sieve to get required size of granules. The finished granules is discharged into the barrel via the discharging chute. Oscillating Granulator,Swing Granulator,Pesticides Oscillating Granulator,Detergent Swing Granulator Changzhou Bole Tech Co.,Ltd , https://www.bolecoater.com
LP-W Sanmu steel plate clamps use four-point lifting method. This is very important in the lifting of multi-layer thin plates. Four-point lifting makes the lifting process more stable and reliable.
At the same time, the hooks of the steel plate clamps are in a right angle shape and can be inserted into the gaps of the multi-layer steel plates, so that they can be in close contact with the steel plates and ensure the safety of the lifting.
In the end, Xiao Bian introduced the load and opening of the steel clamp. This can be most directly described as it applies to the lifting of multi-layer thin plates. LP-W Sanmu steel clamps have a maximum load of 12 tons and openings of 0 to 250 mm. .
When we choose the lifting tools, we must choose the lifting devices that are used for hoisting steel plates, and we must choose the lifting devices that are safe and reliable during the lifting process.