Zn wheel balance weight is made of enviromental-friendly Zinc coated with anti-corrosion epoxy resin, complying with European standared. We supply good quality clip-on type and stick-on type wheel weight. Size: 5g-60g
To begin with, it is important to choose the appropriate impact weight for either steel or aluminum rims. The balancing weight must also be selected based on the shape of the motorcycle or car rim, taking into account the type of rim and rim flange shape. Once the balancing weight has been chosen, it should be placed on the rim to ensure a proper fit. Zn Balance Weight,Zinc Balance Weight,Zn Wheel Balance Weight Ningbo Heyu Tire Repairs Co., Ltd. , https://www.auto-repairs-tools.com
1.Professinal Manufacturer for motorcycle tubes
2. Top quality with natural rubber and butyl rubber.
3. Excellent performance at Tensile strength elongation
4. Certification: SONCAP, BIS, ISO, CCC,CIQ etc
5. Oem acceptableÂ
               INNER TUBE-AVAILABLE
               INNER TUBE-AVAILABLE
3.00-8
2.50/2.75-17
3.50/4.00-8
2.75-17
4.80/4.00-8
2.75/3.00-17
4.00-8
3.00-17
3.00-10
3.50-17
3.50-10
4.00/4.10-17
4.00-10
4.00/4.50-17
4.00/4.50-10
2.50-18
5.00-10
2.50/2.75-18
120/130/90-10
2.75-18
3.00/3.25-12Â (80/100-12)
2.75/3.00-18
3.50/3.75-12
3.00-18
4.00-12
3.25-18
4.50-12
3.50-18
4.00/4.50-12
4.00/4.50-18Â (100/100-18)
5.00-12
4.10-18
120/130/70-12
4.60-18(110/100-18)
110/90-13
2.50-19
130/60-13
2.75/3.00-19
155/165-13
3.25/3.50-19
1.85-14
3.50/4.00-19(100/90-19)
2.00-14
3.75-19
2.25/2.50-14Â (60/100-14)
2.75/3.00-21
2.50-14
16*3.00
2.75-14
16*2.50/2.70
2.75/3.00-14
16*2.125
3.00-14
18*2.125
120/70-14
18*2.5
4.50/5.00-14
26*1Â 1/2
5.50/5.00-14
28*1Â 1/2
130/90-15
27/28*3.25/3.5
2.25/2.50-16
60/80-17
2.50/2.75-16
70/80-17
3.00-16
90/80-17
3.25-16
60/90-17
3.50-16
70/90-17
110/90-16
80/90-17
120/130/90-16
90/90-17
4.00/4.50-16
60/90-18
1.85-17
70/90-18
2.00-17
80/90-18
2.25-17
90/90-18
2.25/2.50-17(70/100-17)
60/100-17
2.50-17
Next, position the impact weight in the required location on the steel or aluminum rim. Before hitting the weight, it is crucial to ensure that the clip is correctly positioned on the rim flange. Once the weight is properly aligned, it can be struck with a suitable mounting tool such as balancing weight tongues or a hammer.
When mounting the impact weights, it is recommended to apply a maximum of two strong blows. Increasing the stroke rate can potentially damage the coating of the balancing weights. Therefore, it is important to be careful and precise when mounting the weights to avoid any damage to the rims or weights.