Pneumatic Ball Type Inlet Valve / Dome Valve (GYDF-B)

Model NO.: GYDF-B
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Suitable Temperature: Below 150 Deg C
Size: Dn80-Dn350
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Design Pressure: Pn10, Pn16
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Model NO.: GYDF-B
Thread Position of Valve Rod: Outside Gate Valve
Usage: Emptying
Standard: DIN
Application: Industrial Usage
Suitable Temperature: Below 150 Deg C
Size: Dn80-Dn350
Medium: Dry Ash in Power Plant, Slurry, Cement Ash, Powder
Design Pressure: Pn10, Pn16
Trademark: GOOLE, OEM
Transport Package: Plywood Case
Specification: CE, SGS, GMP
Origin: Wenzhou, Zhejiang, China
HS Code: 8481804090
Pneumatic  Ball Type Inlet Valve / Dome Valve (GYDF-B)

Installation, Use & Maintenance:
1. Before Installation, it's necessary to clean the valve and remove possible defects caused in the transportation process.
2.Check carefully whether marks and the nameplate on the valve meet operating requirements.
3. This valve can be insstalled on pipelines at any angle.
4. This valve shall be fully open or fully closed in running and not be used as a throttle valve, or else its sealing surfaces will be washed and get worn faster.
5. For Long term storage, it shall be stored in a dry and ventilated room whth periodic check to avoid rust.
6. Knocking shall be avoided in the transportation process.

Structural Features:
1.Its sealing surface adopt silicone rubber inflatable seal to guarantee zero leakage.
2. The valve adopts double electromagnetic control, and dedicated slenoid valves are used for control of both actions of the cylinder and exhaust of the gasket ring to ensure zero abrasion between the sealing surface and the spherical surface, thus improving its service life.
3. A rolling bearing is mounted between the valve body and the lock ring, overcoming the friction produced in rotations of the ball, which can thus rotate flexibly.

Working Principle
When tthe valve is closed, the dedicated solenoid valve for the pneumatic actuator will act; the pneumatic actuator will drive the ball to rotate to the closing position through the valve stem, triggering the changeover push rod, and then the gasket ring will be flated to compress the ball surface to produce a seal. 
When the valve is open, the dedicated solenoid valve for the gasket ring will act first, the gasket ring wil exhaust rapidly and disengate itself from the ball surface to a free state, then the dedicated solenoid valve for the pneumatic actuator will act, and the cylinder will drive the ball to rotate to the open position.

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Spacer Ring F6a
2 Stem 1Cr13 8 Swing Bar Q235
3 Ball WCB+HF 9 Bracket Q235
4 Stem 1Cr13 10 Pneumatic Actuator Aluminum Body
5 Seat Viton      
6 Body WCB      

Application Specification
1. Design and Manufacture: GB/T 12224
2. Face to Face Dimension: Manufacturer's Standard
3. Flange Dimension: JB/T 79.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 200 160 125 16 520 4-18  
65 220 180 145 18 595 4-18  
80 240 195 160 20 635 8-18  
100 280 215 180 20 630 8-18  
125 300 245 210 22 715 8-18  
150 320 280 240 24 840 8-23  
175 320 310 270 26 885 8-23  
200 350 335 295 26 1155 8-23  
250 400 405 350 30 1400 8-23  
300 450 460 400 30 1800 12-23  

 

  Pneumatic  Ball Type Inlet Valve / Dome Valve (GYDF-B)

Installation, Use & Maintenance:
1. Before Installation, it's necessary to clean the valve and remove possible defects caused in the transportation process.
2.Check carefully whether marks and the nameplate on the valve meet operating requirements.
3. This valve can be insstalled on pipelines at any angle.
4. This valve shall be fully open or fully closed in running and not be used as a throttle valve, or else its sealing surfaces will be washed and get worn faster.
5. For Long term storage, it shall be stored in a dry and ventilated room whth periodic check to avoid rust.
6. Knocking shall be avoided in the transportation process.

Structural Features:
1.Its sealing surface adopt silicone rubber inflatable seal to guarantee zero leakage.
2. The valve adopts double electromagnetic control, and dedicated slenoid valves are used for control of both actions of the cylinder and exhaust of the gasket ring to ensure zero abrasion between the sealing surface and the spherical surface, thus improving its service life.
3. A rolling bearing is mounted between the valve body and the lock ring, overcoming the friction produced in rotations of the ball, which can thus rotate flexibly.

Working Principle
When tthe valve is closed, the dedicated solenoid valve for the pneumatic actuator will act; the pneumatic actuator will drive the ball to rotate to the closing position through the valve stem, triggering the changeover push rod, and then the gasket ring will be flated to compress the ball surface to produce a seal. 
When the valve is open, the dedicated solenoid valve for the gasket ring will act first, the gasket ring wil exhaust rapidly and disengate itself from the ball surface to a free state, then the dedicated solenoid valve for the pneumatic actuator will act, and the cylinder will drive the ball to rotate to the open position.

Main Parts and Materials
Sr No. Parts Material Sr No. Parts Material
1 Body WCB 7 Spacer Ring F6a
2 Stem 1Cr13 8 Swing Bar Q235
3 Ball WCB+HF 9 Bracket Q235
4 Stem 1Cr13 10 Pneumatic Actuator Aluminum Body
5 Seat Viton      
6 Body WCB      

Application Specification
1. Design and Manufacture: GB/T 12224
2. Face to Face Dimension: Manufacturer's Standard
3. Flange Dimension: JB/T 79.1, ANSI B16.5  DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel

Main External and connecting Dimensions
DN PN L D D1 C H n-d  
50 10 200 160 125 16 520 4-18  
65 220 180 145 18 595 4-18  
80 240 195 160 20 635 8-18  
100 280 215 180 20 630 8-18  
125 300 245 210 22 715 8-18  
150 320 280 240 24 840 8-23  
175 320 310 270 26 885 8-23  
200 350 335 295 26 1155 8-23  
250 400 405 350 30 1400 8-23  
300 450 460 400 30 1800 12-23  

 

Â