Graphite electrodes are used mainly in ladle furnaces, electric-arc furnace steelmaking, Yellow phosphorus furnace, Uhp Graphite Electrode,Graphite Electrode For Steelmaking,Electrodes For Sales Uhp,300Mm Graphite Electrode Uhp Carbographite Industrial PTE.LTD , https://www.carbographite.com
Industrial silicon furnace or melting copper. They are presently the only products available that have the high levels
of electrical conductivity and the capability of sustaining the extremely high levels of heat generated in this
demanding environment. High Quality Needle Coke in HP&UHP graphite electrode, to ensure the application for the
electrodes are more perfect. Graphite electrodes are also used to refine steel in ladle furnaces .
kneading, forming, baking and pressure impregnation, graphitization
and then precision machined with professional CNC machining. Our
electrodes have the characteristics of low resistivity, good electrical
conductivity, low ash, compact structure, good anti oxidation and
high mechanical strength, and then they are the best conductive
material for electric arc furnace and smelting furnace.
Our company is specilized in the feild of graphite electrode for 27 years in
China. We have full experiences in exporting RP HP UHP graphite electrode
to Russia, Egypt, Pakistan, Bangladesh, Italy, Oman, Malaysia, etc..
Ring cabinet grounding note
JDX ring network cabinet grounding note
Ring Grounding Equipment Grounding Cable Grounding Wire Overview: The grounding wire is composed of insulated operating rod, wire clamp, short-circuit wire, grounding wire, grounding ruizi, bus clip, ground clamp, etc. The wire clamp and ground clamp are made of high-quality aluminum alloy die-casting and have high strength. After surface treatment, the surface of the clamp is not suitable for oxygen. The operating rod is made of imported epoxy resin and is made into a color tube, which has good insulation performance, high strength, light weight, bright color, and smooth appearance. Portable short-circuit grounding wires can be classified into split-phase grounding wires and phase-type grounding wires. The use of different voltage, there is a single-section, multi-section operating stick. Short-circuit grounding wires are used for substations and circuits.
JDX ring cabinet grounding note:
Dry ventilation shall be ensured during storage to avoid the influence of moisture on insulation performance of the insulating rod. Every time before use, you should carefully check whether the grounding wire is in good condition. The soft plastic copper wire should be bare, broken, and the nuts should not be loosened. Otherwise you must not use it. The product should be kept clean and tidy and must not be thrown anywhere. Pay attention to sanitation work to prevent sediment and dirt from entering the pores of the product, thus affecting the normal use of the grounding wire. Welcome inquiries! We look forward to working with you!
JDX ring network cabinet ground wire Ordering Information:
1. There are two types of short-circuit grounding wire: split-phase type and combination type. There are two kinds of flat wire type and hook type wire end clamps, please indicate when users choose. 2. The cross-sectional area and length of the soft plastic copper wire are matched according to the user's specific requirements. 3, when ordering must explain the wire size range and the use of voltage levels. 4. Insulating operating rods are selected according to the requirements of the user. 5, factory equipped with a dedicated grounding pole, the user can choose according to need.
Dear Customer:
Thank you for your attention to our products. In addition to this product introduction, our company also introduces the vacuum tester, infrared thermometer, dielectric loss tester, high voltage test transformer, vacuum oil filter, high current generator, etc. If you are interested in our products, welcome to inquire. Thank you!