Features:
ER70S-6 is a kind of mild steel copper coated Welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
Application:
Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
1. Wire into the plant must be stored in dry conditions, can not open welding wire coil waterproof packaging.
Copper Plating Welding Wire ,Mig Welding Copper Wire,Copper Plating Wire,Copper Plating Welding Wires Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.jswkweldingwire.com
2. Welding shall be removed before welding surface oil, rust, water and other impurities.
3. The CO2 gas protection, CO2 gas purity 99.98%.
4. CO2 welding protective gas flow rate should be controlled at 20~25L/min.
5. Wire extension length should be controlled in the range of 15~25mm.
· SAIC General Motors Co., Ltd. recalls some Chevrolet Cruze cars
Recently, SAIC General Motors Co., Ltd. filed a recall plan with the AQSIQ in accordance with the "Regulations on the Management of Defective Automobile Product Recalls" and the "Implementation Measures for the Management of Defective Automobile Product Recalls", and decided to start from December 29, 2017. Recall the following vehicles:
(1) Some of the 2012-2016 Chevrolet Cruze vehicles produced between February 1, 2012 and July 24, 2016, totaling 796,952;
In the above range (1), due to the problem of durable corrosion of the wire harness connector pins of the electronic power steering machine, the electronic steering assist system may report the fault code after some vehicles are used for a long time. In extreme cases, the electronic steering assist of the vehicle may be invalid. Security risks. SAIC-GM will apply grease to the harness of the electronic power steering machine for vehicles within the recall range and install rubber blocks under the power steering auxiliary motor to eliminate safety hazards.
(II) Some 2016 Chevrolet Cruze vehicles produced between April 28, 2016 and May 23, 2016, totaling 9,415 vehicles.
The problem of the wire harness detection process of the electronic assist steering gear supplier in the above range (2) may cause the electronic steering assist system to report the fault code when part of the vehicle is running. In extreme cases, the electronic steering assist of the vehicle may be invalid, and there is a safety hazard. SAIC General Motors Co., Ltd. will replace the electronic power steering harness with the vehicles within the recall range to eliminate potential safety hazards.
The recall was carried out under the circumstances of the AQSIQ initiated defect investigation. For some time, the AQSIQ Defective Product Management Center received complaints from consumers about this issue. After receiving the complaint, the AQSIQ immediately deployed the Defective Product Management Center to conduct a defect investigation and assessment of the above issues. Affected by the investigation, SAIC General Motors Co., Ltd. decided to take recall measures to eliminate potential safety hazards.
SAIC General Motors Co., Ltd. will notify customers by registered mail, telephone, SMS, etc. After the official implementation of the recall, SAIC-GM Chevrolet Special Service Center will take the initiative to contact the users within the scope of the recall and arrange for free maintenance. Users can call the customer service hotline: SAIC GM Chevrolet 8008201912 (landline dialing) / 4008201912 (mobile phone dialing) for consultation. Users can also visit the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the AQSIQ Defective Product Management Center hotline to reflect problems during the implementation of the recall or to submit defects.
Â