Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine.
Leisuwash 360 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
The contactless robotic automatic robot leisuwash 360 is the newest technology of contactless high-speed automatic washing of cars. Fully automated process of contour washing and drying of the car in combination with the technological capabilities of self-service (payment, choice of car wash programs) provide high-quality contactless washing services in the absence of staff.
Machine Car Wash,Leisuwash 360 Plus,Automatic Express Car Wash,Touchless Car Wash Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdtouchfreecarwash.com
FHB-07Specifications
1)This bending machine is uesd for processing pipe to long U shaped 2)High efficency 3) Easy operation 4) Dependable property
     Hairpin tube bending&cutting machine is used with AC servo motor NC system to drive to feed. The feeding is precision. The consistency of the length is good. It is also used with clamping hydraulic and bending. The angle of bending is and the run of the equipment is stable.
      It is used with PLC to control and also used with touching screen to set parameter automaticaally. The program is very easy and you can only use one switch to complete the whole operation.
       The whole machine is used with import components and the protecting function is perfenct.
Different bending dies can be changed to meet various requirements.
      Different bending dies can be changed to meet varous requirements.
      Main technical specification:
Â
Model
FHB-05
FHB-07
Specification of copper tube
φ7(wall thickness 0.25-0
5mm)
φ7(wall thickness 0.25-0
5mm)
φ9.52(wall thickness 0.25-0
5mm)
φ9.52(wall thickness 0.25-0
5mm)
Center distance of bending
φ7(15.88-22mm)
φ7(15.88-22mm)
φ9.52(19.05-25.4mm)
φ9.52(19.05-25.4mm)
Bending length
300mm-1300mm
300mm-2500mm
Number of copper tube
5 radix
7 radix
Bending speed
26s(per cycle)(L=2400mm)
Â
Precision of center distance of U shape
±0.1mm
±0.1mm
Ellipticity of bending part
? 15%
? 15%
Reducing rate of wall of bending part
? 35%
? 35%
Length precision of long U pipe
±0.8mm
±0.8mm
Length precision of two ends of long U pipe
1.0mm
1.0mm
Model of control
Manual ,jog , automatic
Manual ,jog , automatic
straightening
≤ 3mm(L=1000mm)
≤ 3mm(L=1000mm)
Closing -in rate
10%
10%
Work voltage
AC380
AC380
Air pressure rate
0.3-0.5Mpa
0.5-0.7Mpa
Â
Â
FHB-07Specifications
1)This bending machine is uesd for processing pipe to long U shaped 2)High efficency 3) Easy operation 4) Dependable property
     Hairpin tube bending&cutting machine is used with AC servo motor NC system to drive to feed. The feeding is precision. The consistency of the length is good. It is also used with clamping hydraulic and bending. The angle of bending is and the run of the equipment is stable.
      It is used with PLC to control and also used with touching screen to set parameter automaticaally. The program is very easy and you can only use one switch to complete the whole operation.
       The whole machine is used with import components and the protecting function is perfenct.
Different bending dies can be changed to meet various requirements.
      Different bending dies can be changed to meet varous requirements.
      Main technical specification:
Â
Model
FHB-05
FHB-07
Specification of copper tube
φ7(wall thickness 0.25-0
5mm)
φ7(wall thickness 0.25-0
5mm)
φ9.52(wall thickness 0.25-0
5mm)
φ9.52(wall thickness 0.25-0
5mm)
Center distance of bending
φ7(15.88-22mm)
φ7(15.88-22mm)
φ9.52(19.05-25.4mm)
φ9.52(19.05-25.4mm)
Bending length
300mm-1300mm
300mm-2500mm
Number of copper tube
5 radix
7 radix
Bending speed
26s(per cycle)(L=2400mm)
Â
Precision of center distance of U shape
±0.1mm
±0.1mm
Ellipticity of bending part
? 15%
? 15%
Reducing rate of wall of bending part
? 35%
? 35%
Length precision of long U pipe
±0.8mm
±0.8mm
Length precision of two ends of long U pipe
1.0mm
1.0mm
Model of control
Manual ,jog , automatic
Manual ,jog , automatic
straightening
≤ 3mm(L=1000mm)
≤ 3mm(L=1000mm)
Closing -in rate
10%
10%
Work voltage
AC380
AC380
Air pressure rate
0.3-0.5Mpa
0.5-0.7Mpa
Â
Â
Smac High Efficiency Professional CNC Automatic Hairpin Bender for Air Conditioner
Model NO.: FHB-07
Trademark: SMAC
Origin: China
Model NO.: FHB-07
Trademark: SMAC
Origin: China