Waterproof LED Digital Four Crescent Detectors

Model NO.: P-004
Operating Temperature Range: -20°C~+70°C
Technich Type: Microwave
Installation Method: Open-hole Type
Car Parking Sensor: Obstacle Detection Radar
Transport Package: Neutral Box
Origin: Guangzhou, China
HS Code: 8526109099
Model NO.: P-004
Operating Temperature Range: -20°C~+70°C
Technich Type: Microwave
Installation Method: Open-hole Type
Car Parking Sensor: Obstacle Detection Radar
Transport Package: Neutral Box
Origin: Guangzhou, China
HS Code: 8526109099
Key Specifications/Special Features:

Three-color LED display
Left and right direction indicator
BiBi-alarm sound Sensors itself can detect the fautly sensors if abnormal situation appeared
Optional insert-in sensors
Rated voltage: 12V
Operating range: 9 - 16V
Rated current: 20 - 200mA
Detecting distance: 0.30 - 2.5m
Ultrasonic frequency: 40kHz
Working temperature: -30 - +70 degree Celsius

Testing:
1. Connect the power wire of the control box correctly.
2. Connect the monitor with the control box. Put the shift lever to reverse gear to start the system up, and the monitor will send a sound
    of warning.For LED or LCD series, the displays show "--" or "." at the same time. It indicates the system is under detecting status.
3. After the installation of sensors, adjust the direction to the correct, then arrange the wires in good order. Connect one sensor with  
    corresponding outlet in the control box. It can operate normally if person stands in 1.0M. Check each of the sensors separately 
    according to this way. Then connect all of them with the control box.
4. Enter into the back gear to make the system working. Lay an obstacle behind the car, change the distance and orientation to test 
    the system. If the system with 6~8 sensors is installed, switch off the power after finishing the test of reverse detection, move the
    obstacle to the front of the car, then apply the brake to test the front detection.
5. Notes:
    a. While the reverse gear is engaged, although to put on the brake, the system with 6~8 sensors only checks the place behind the
    car.
    b. Switch off the brake power, the system with 6~8 sensors will still keep working for 10 seconds.
  
Packing Box(Universal):
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors Key Specifications/Special Features:

Three-color LED display
Left and right direction indicator
BiBi-alarm sound Sensors itself can detect the fautly sensors if abnormal situation appeared
Optional insert-in sensors
Rated voltage: 12V
Operating range: 9 - 16V
Rated current: 20 - 200mA
Detecting distance: 0.30 - 2.5m
Ultrasonic frequency: 40kHz
Working temperature: -30 - +70 degree Celsius

Testing:
1. Connect the power wire of the control box correctly.
2. Connect the monitor with the control box. Put the shift lever to reverse gear to start the system up, and the monitor will send a sound
    of warning.For LED or LCD series, the displays show "--" or "." at the same time. It indicates the system is under detecting status.
3. After the installation of sensors, adjust the direction to the correct, then arrange the wires in good order. Connect one sensor with  
    corresponding outlet in the control box. It can operate normally if person stands in 1.0M. Check each of the sensors separately 
    according to this way. Then connect all of them with the control box.
4. Enter into the back gear to make the system working. Lay an obstacle behind the car, change the distance and orientation to test 
    the system. If the system with 6~8 sensors is installed, switch off the power after finishing the test of reverse detection, move the
    obstacle to the front of the car, then apply the brake to test the front detection.
5. Notes:
    a. While the reverse gear is engaged, although to put on the brake, the system with 6~8 sensors only checks the place behind the
    car.
    b. Switch off the brake power, the system with 6~8 sensors will still keep working for 10 seconds.
  
Packing Box(Universal):
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors
Waterproof LED Digital Four Crescent Detectors

Trolleying Mechanism and Spare Parts

A Tower Crane trolley is a component of a tower crane that moves horizontally along the jib of the crane. It is a wheeled device that is attached to the jib and is used to move the load from one location to another. The trolley is controlled by the operator using a remote control or a cabin located on the crane. The trolley is an essential component of the tower crane as it allows the operator to move the load precisely and safely. It is designed to withstand the weight of the load and the forces generated during the lifting process.

We supply all kinds of high quality and good price trolleying mechanism and spare parts. As one of the leading tower crane and spare parts suppliers, we provide Tower Crane Trolley, Tower Crane Trolleying Motor, Crane Trolley Mechanism, Trolleying Fan, as well as Slewing Mechanism and Spare Parts, Hoisting Mechanism And Spare Parts etc.

A tower crane trolley consists of a car that moves along the jib through some lanes. This movement gives the necessary maneuverability in the tower crane. It is metallic so that it supports the weight to be lifted.

Crane Trolley Mechanism,Tower Crane Trolley Motor,Trolleying Mechanism,Tower Crane Trolleying Motor,Tower Crane Trolley,Trolleying Fan

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com