Introduction: UV dispenser dispensing has many advantages, such as saving glue costs, product curing faster, dispensing efficiency, UV dispenser in the work not only on the reliability of auto-dispenser equipment itself is better, at the same time The type of adhesive dispensed is also very much related. Due to its moderate viscosity and good fluidity, UV glue can be placed directly on the dispensing equipment for dispensing and batch dispensing. To be efficient, the UV dispensing machine should be dispensing quickly and efficiently. The reason for its characteristics, the curing is also fast. UV glue, also known as shadowless glue, ultraviolet light curing glue, light-sensitive glue, it is a kind of adhesive that must be cured by ultraviolet light. UV glue is ultraviolet light-curing glue. Ultraviolet light is invisible to the naked eye and is visible light. Electromagnetic radiation. AS WE ALL KNOW, THE STARTING OF AN ENGINE REQUIRES EXTERNAL SUPPORT, AND THE STARTER IS PLAYING THE ROLE. GENERALLY SPEAKING, THE BOOT MACHINE USES THREE COMPONENTS TO ACHIEVE THE WHOLE START-UP PROCESS. THE DC SERIES EXCITING MOTOR INTRODUCES THE CURRENT FROM THE BATTERY AND CAUSES THE MECHANICAL MOTION OF THE DRIVING GEAR OF THE STARTER; THE DRIVE GEAR MESHES THE DRIVING GEAR INTO THE FLYWHEEL RING, AND CAN BE AUTOMATICALLY REMOVED AFTER THE ENGINE STARTS; THE SWITCH OF THE STARTING MACHINE IS CONTROLLED BY AN ELECTROMAGNETIC SWITCH. AMONG THEM, THE MOTOR IS THE MAIN PART OF THE STARTER, AND ITS WORKING PRINCIPLE IS THE PROCESS OF TRANSFORMING THE ENERGY WHICH IS BASED ON AMPERE'S LAW IN THE PHYSICS OF JUNIOR MIDDLE SCHOOL, THAT IS, THE FORCE OF THE ELECTRIC CONDUCTOR IN THE MAGNETIC FIELD. THE MOTOR INCLUDES NECESSARY ARMATURE, COMMUTATOR, POLE, BRUSH, BEARING AND CASE. THE ENGINE MUST ROTATE WITH EXTERNAL FORCE BEFORE IT RUNS ON ITS OWN POWER. THE ENGINE CHANGES FROM STATIC STATE TO EXTERNAL OPERATION BY EXTERNAL FORCE, WHICH IS CALLED ENGINE START. THERE ARE THREE WAYS TO START THE ENGINE, INCLUDING HUMAN START, AUXILIARY GASOLINE ENGINE START AND ELECTRIC START. IT IS SIMPLE BUT INCONVENIENT, BUT NOT CONVENIENT, AND THE LABOR INTENSITY IS LARGE. IT IS ONLY SUITABLE FOR SOME SMALL POWER ENGINES. IT IS RESERVED ONLY IN SOME CARS AS BACKUP. THE AUXILIARY GASOLINE ENGINE IS MAINLY USED IN HIGH POWER DIESEL ENGINE; THE OPERATION OF ELECTRIC STARTING IS SIMPLE AND FAST. IT HAS THE ABILITY OF REPEATED STARTING AND REMOTE CONTROL, SO IT IS WIDELY USED BY MODERN CARS. Valeo Starter,Valeo Starter Motor,Valeo Engine Starter,Valeo Auto Starter Ningbo zhongwang auto fittings co.,ltd , https://www.zowoparts.com
First of all, we must understand the UV dispenser dispensing work:
1. The product cures quickly, and it is cured with UV light. Therefore, this adhesive is suitable for bonding between surface bright objects and bright objects. It cannot be used for bonding processes with non-surface bright objects or bottom unknown materials. Because such adhesives are composed of acrylic prepolymers, reactive monomers, and ultraviolet photoinitiators, no photo-initiator can be activated without UV irradiation, and the prepolymers cannot be further polymerized to form macromolecules to be cured.
2. Dispensing efficiency, curing speed is easy to control, according to process requirements can be fast or slow, is conducive to manual operations or factory line assembly line operations. It can be used with UV lamps or UV tunnel furnaces. After the dispensing machine is finished, it can be quickly cured by simply turning on the UV lamp, and the product to be bonded can be quickly fixed.
3. Saves the cost of glue, UV glue is a non-volatilized, bright, transparent glue solution. No volatiles occur during the curing process. Basically, 100% of the adhesive is converted into a glue solid, so the glass crystal acrylic and other adhesive The connection can achieve a seamless adhesive effect.
In the work of UV dispensers, not only does the reliability requirements of the automatic dispensing machine itself be better, but also the types of adhesives that are dispensed are greatly affected. When we meet the dispensing process requirements in our manufacturing work, everyone Choose as fast as possible, efficient, low wastage glue, and choose to automate UV automatic dispensing machines with high efficiency.