25 KW Hot Sale China Stamford A. C. Sychronous Single Phase Brushless Alternator 1.Any permanent magnetic generators, providing invariable excitation on all occasions. 2.Easy to be connected with power network or other generators. Standard 2/3 pitch windings check excessive midline current. 3.Balanced rotor with single ball bearing or  two sealed ball bearings 4.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts 5.Wide range of Flange adaptor and single bearing coupling disc 6. Meet leading Industry and Marine standards Electrical Charcter: Excitation Systerm AS440,SX460,SA465,SX440,SX421,MX341 or MX321 The main stator provides power for excitation of the exciter field via AVR Output power of exciter's rotor is input to that of mains through 3-phase full wave rectifier.Two ends of the rectifier are connected with piezoresistance for restraining surge voltage and avoiding the impact caused by short circuit or parallel synchronization loss. Exciter's Stator is equipped with permanent magnetic steel, it can make generator starting smoothly in any occasions. Voltage regulation(1.0%) and low frequency protection, exterior voltage adjustment of SX440,MX341 and Mx321 suitable for the generator with permanent magnetic generator (PMG) Frame: All industrial standard generators is IP21(NEMA1), also IP23 is optional, But rated power will decrease 5%, Marine standard generators is Ip23. Air filter is optional, but rated power will decrease 5% if installed. Axis and Key All of the generator rotors pass balance test, The vibrations are lower than the minium of BS6861 P.A, G2.5 two bearing generator has a half-key testing balance. Terminal and Terminal Box The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels Engine Adaptor and Coupling Disc SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available. SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available. Voltage Regulation: Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR Applications:It is suitable to match with any brands of the diesel engines in the world, such as USA brand, UK brand, Lovol, Deutz,Volvo Penta,Kubota, Doosan and China made diesel engines. It can be used in land, watercraft, railway, hotel and the places need industry power. Our high-quality reliable AC generators are winning great acclaim from the domestic and abroad power generation market. FAQ : Delivery within 25 days after deposit confirmed. 25 KW Hot Sale China Stamford A. C. Sychronous Single Phase Brushless Alternator 1.Any permanent magnetic generators, providing invariable excitation on all occasions. 2.Easy to be connected with power network or other generators. Standard 2/3 pitch windings check excessive midline current. 3.Balanced rotor with single ball bearing or  two sealed ball bearings 4.Convenient installation and maintenance with easy access to terminals, rotating diodes and coupling bolts 5.Wide range of Flange adaptor and single bearing coupling disc 6. Meet leading Industry and Marine standards Electrical Charcter: Excitation Systerm AS440,SX460,SA465,SX440,SX421,MX341 or MX321 The main stator provides power for excitation of the exciter field via AVR Output power of exciter's rotor is input to that of mains through 3-phase full wave rectifier.Two ends of the rectifier are connected with piezoresistance for restraining surge voltage and avoiding the impact caused by short circuit or parallel synchronization loss. Exciter's Stator is equipped with permanent magnetic steel, it can make generator starting smoothly in any occasions. Voltage regulation(1.0%) and low frequency protection, exterior voltage adjustment of SX440,MX341 and Mx321 suitable for the generator with permanent magnetic generator (PMG) Frame: All industrial standard generators is IP21(NEMA1), also IP23 is optional, But rated power will decrease 5%, Marine standard generators is Ip23. Air filter is optional, but rated power will decrease 5% if installed. Axis and Key All of the generator rotors pass balance test, The vibrations are lower than the minium of BS6861 P.A, G2.5 two bearing generator has a half-key testing balance. Terminal and Terminal Box The three-field generator has 12 leads brought out to the terminals in terminal box. The terminals are put on the non drive end. The box is equipped with removable panels Engine Adaptor and Coupling Disc SY-A Series single-bearing, engine adaptor: SAE0,1,2,3 and 4; Coupling discs: SAE8,10,11,.5,14 and 18 are available. SY-A Series double-bearing, engine adaptor: SAE0,1,2,3,4 and 5 are available. Voltage Regulation: Voltage regulation refers to the change of voltage from non-load to with power factor ranging from 0.8 to 1 and 3%'s fluctuation of the speed of engine. Voltage is adjusted via potentiometer of AVR Applications:It is suitable to match with any brands of the diesel engines in the world, such as USA brand, UK brand, Lovol, Deutz,Volvo Penta,Kubota, Doosan and China made diesel engines. It can be used in land, watercraft, railway, hotel and the places need industry power. Our high-quality reliable AC generators are winning great acclaim from the domestic and abroad power generation market. FAQ : Delivery within 25 days after deposit confirmed.
Desulfurization Slurry Pump also named as FGD Slurry Pump is wild used for the
power plant or other industry field, transferring the lime slurry, according to the abrasion
and corrosion condition, design and manufacture the Rubber lined FGD pump and All
metal FGD pump.
Products detail:
-Single stage, single suction, horizontal centrifugal pump
FAQ:
Q: How
about payment terms?
A: 30%
TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible
payment
can be
negotiated.
Q:
Installation and commissioning?
A: We
will send our engineer for installation and commissioning, but relevant cost
will be paid by you.
Q: Do
you have some videos where we can see the line producing?
A: Yes,
we can provide some videos for reference.
Series
of TL FGD pump is a single stage single suction horizontal centrifugal pump. It
is mainly used as the circulating pump for absorbent tower in FGD appliances.
It has such features: wide range flowing capacity, high efficiency, high saving
power. TL series pump is matched by tight structure X bracket which can save
much space.
EX:
600X-TLR
The diameter of discharge: 600mm, Rubber liner; bearing lubricating way:
Diluted oil ( Thin- oil)
600X-TL
The diameter of discharge: 600mm, Metal liner; bearing lubricating way: Diluted
oil ( Thin- oil)
Technology features
The pump wet parts are designed by advanced
CFD flowing simulating analysis technology to ensure the design reliable and
working effective.
It can change the impeller`s position in pump
casing by adjusting the bearing unit to keep the pump working high efficiently
all the time.
This kind of pump adopt back pull out
structure, keeping the simple structure and easy maintenance. Not need
disassemble inlet and outlet pipeline.
Two sets of taper roller bearing is fixed
at the end of the pump, the column roller bearing is equipped at driving end. The
bearing is lubricated by thin oil. All these can improve the bearing working
condition and enhance the service life greatly.
Mechanical sealing is adopted integrating
mechanical sealing which is specialized in FGD technology to ensure its
working.
Material
selection:
Our company developed the special anti wear
and anti corrosive material which own the duplex stainless steel`s anti-corrosive
property and the high chrome white iron`s anti abrasive property in FGD
process.
In the rubber pump casing, impeller,
suction cover / cover plate are all made of specialized anti-wear and
anti-corrosive material ; the material of front liner, back liner and back
liner insert are natural rubber with light weight and natural, having excellent
anti-corrosive property and low cost.
In metal pump casing, impeller, volute
liner, suction plate and back plate are all made of specialized anti wear and
anti corrosive material, the suction cover are made of ductile iron with
rubber.
KWP
General
Series KWP high-efficiency FGD pump is a
new generation energy saving pump.
The KWP pump is single-stage, centrifugal
pump which specially used for FGD, environment protection, chemicals, and the
paper, sugar and caned food industries. It has the features of high efficiency,
non-clogging and back pull out design which can allow the rotor to be removed
from the pump casing without disturbing the piping or dismantling the casing. It
simplifies maintenance also allows fast inter change of the impellers and wear
plate of suction side, thereby allow the pump to be rapidly modified to suit
for different operating conditions.
This type pump can deliver all kinds of
sewage, clear water, seawater, bittern water, waste water and sludge so that it
can be used in water supply plant, sewage treatment works, brewery.
According to the diameter of discharge, the
KWP pump is from 40mm to 500mm.
Quantity range: 10~3500CBM/h.
Head range: 5~90m.
These are the frequently used metal
material combination for KWP non-clogging pump. According to the different
medium delivered by the pump, the pump head could be made of different
materials, such as A49,2205, 2605N, 316L, ZG2Cr13, HT250.
Reliable rotor structure:
KWP series products are equipped with the
heavy-duty designed bearing based on Germany standard, so the bearing could
support more load; Oil lubrication type ensures a smooth and reliable
operation, and normally, the service life of such bearing could be over 30,000
hours.
HS,HSR
Type HS/HSR pumps are cantilevered,
Horizontal, Centrifugal Slurry Pump. Widely used in electricity, heating,
chemical industry, steel, coking, etc of the flue gas desulfurization and
desulfurization unit peripheral pump, this series of products with advanced
technology, high efficiency and energy saving, the characteristics of
reasonable structure, convenient maintenance, the FGD industry preferred
products, has been serviced thousand of flue gas desulfurization project for
environment protection.
Desulfurization Slurry Pump Desulfurization Slurry Pump,Anti Abrasive Fgd Recycl Pump,Ksb Fgd Recirculation Pump,Fgd Recycle Pump Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com
Features:
Â
2. What's your payment terms?
1).We accept 30% T/T as the deposit,the balance payment paid before delivery when see the copy of B/L.
2). L/C at sight.
4. What's your warranty & guaranty ?
Warranty is one year or 3000 hours which comes first.Â
5. What's your MOQ?
MOQ  is 60 sets.
6. What's the frequency of diesel generators?
50Hz & 60HZ .
7. What's the voltage of your diesel generator?
Voltage is 220/380V,230/400V,240/415V,110/220V,230/440V, just as per your request.
8.Q:Are you a factory or trading company?        A:  We are a famous manufacturer named MINDONG MINSUN POWER,our engineers are from old MINDONG MOTOR factory .
 9. Q:Where is your factory located?         Â
     A: Our factory is in famous power city-FU'AN CITY,FUJIAN,near Taiwan.It is only 2 hours from Fuzhou airport by car;and 2.5 hours by    train from Xiamen Airport;6 hours from Shanghai Airport by train.
10 .Q:What is the material of your products?  Â
     A: We use AAA Grade Iron or Steel cast and 100% copper wire inside alternator.
 11.Q:How about quality control in your factory?     Â
A: MINDONG MINSUN POWER is a good reputiaon factory. We are always paying great attentions to quality controlling from the beginning to the end.We also have strict testing system and equipments for the all procedure of the production,and three engineers.
12. Can you supply spare parts?
A: Yes, we supply spare parts, if within the warranty, we can offer spare parts free.
13.Q: Is it all right to make customer's own brand name?
A: Yes,we can be your OEM manufacture with your authorization of    brand.
14.Q: What is your company's available production capacity?
A: 5000-10000 pieces per month against your orders.
15.What is your main products and engine brands ,and power range?
A: Our main products are ---
1).Copy Stamford ,brushless alternator from the power 7.5 KVA to 2200 KVA .
2).ST,STC ,TZH carbon brush alternator from 2 KVA to 400 KVA.
3).We also have some famous brands of alternators for your options,such as original STAMFORD,LEROY SOMER,MECC,ENGGA,MARATHON etc. to match famous engines for gensets.
Features:
Â
2. What's your payment terms?
1).We accept 30% T/T as the deposit,the balance payment paid before delivery when see the copy of B/L.
2). L/C at sight.
4. What's your warranty & guaranty ?
Warranty is one year or 3000 hours which comes first.Â
5. What's your MOQ?
MOQ  is 60 sets.
6. What's the frequency of diesel generators?
50Hz & 60HZ .
7. What's the voltage of your diesel generator?
Voltage is 220/380V,230/400V,240/415V,110/220V,230/440V, just as per your request.
8.Q:Are you a factory or trading company?        A:  We are a famous manufacturer named MINDONG MINSUN POWER,our engineers are from old MINDONG MOTOR factory .
 9. Q:Where is your factory located?         Â
     A: Our factory is in famous power city-FU'AN CITY,FUJIAN,near Taiwan.It is only 2 hours from Fuzhou airport by car;and 2.5 hours by    train from Xiamen Airport;6 hours from Shanghai Airport by train.
10 .Q:What is the material of your products?  Â
     A: We use AAA Grade Iron or Steel cast and 100% copper wire inside alternator.
 11.Q:How about quality control in your factory?     Â
A: MINDONG MINSUN POWER is a good reputiaon factory. We are always paying great attentions to quality controlling from the beginning to the end.We also have strict testing system and equipments for the all procedure of the production,and three engineers.
12. Can you supply spare parts?
A: Yes, we supply spare parts, if within the warranty, we can offer spare parts free.
13.Q: Is it all right to make customer's own brand name?
A: Yes,we can be your OEM manufacture with your authorization of    brand.
14.Q: What is your company's available production capacity?
A: 5000-10000 pieces per month against your orders.
15.What is your main products and engine brands ,and power range?
A: Our main products are ---
1).Copy Stamford ,brushless alternator from the power 7.5 KVA to 2200 KVA .
2).ST,STC ,TZH carbon brush alternator from 2 KVA to 400 KVA.
3).We also have some famous brands of alternators for your options,such as original STAMFORD,LEROY SOMER,MECC,ENGGA,MARATHON etc. to match famous engines for gensets.
-Wet parts such as casing, impeller, liner plate in anti-abrasion and
corrosion-resistant high chrome cast iron alloy.
-Mechanical Seal
-Hydraulic optimization design, high
-efficient, energy-saving and stable operation-Back-draw hanger bracket
structure easy for maintaining
25 Kw Hot Sale China Stamford a. C. Sychronous Single Phase Brushless Alternator
Model NO.: SY-A184G
HS Code: 8501320000
Model NO.: SY-A184G
HS Code: 8501320000