Austria Technology PVC Cable Material Compounding Granulating Machine

Model NO.: ATS Series
Customized: Customized
Certification: CE, ISO9001:2008
Condition: New
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Pelletizing Type: Strand/Die-Face Pelletizing
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Austria Technology PVC Cable Material Compounding Granulating Machine

Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium Carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
 
Characteristics of product:
1.     High resistance to breakdown strength
2.     Low dielectric loss
3.     Good and stable insulation
4.     Good softness
5.     Good mechanical properties and electric properties
6.     Strong acid and alkali resistance, good chemical stability
 
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.
 
Production line:
Introduction of ATS two-stage compounding line
To produce PVC cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.

About the pelletizing system
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
 
Production process
1. Measuring feeding machine 
2. First stage: twin screw extruder 
3. Second stage: single screw extruder
4. Air-cooling die-face hot cutting 
5. Cyclone separator 
6. Air cooling extended vibrating screen 
7. Metering packaging weigher

Main technical specification:

Machine size
Screw Diameter
(mm)
Screw Speed Max.
(rpm)
Motor Power
(Kw)
Throughput Rate
(Kg/h)

ATS52/120
ATE52
51.4
600
55
150-300

ASE120
120
85
37

ATS65/150
ATE52
62.4
600
90
300-500

ASE150
150
85
45

ATS75/180
ATE75
71
600
132
500-800

ASE180
180
85
55

ATS95/200
ATE95
93
600
250
800-1500

ASE200
200
85
75

 
Characteristics of this set of equipment:
1.     Good mixing effect and the temperature control is convenient
2.     Covers a small area and doesn't need large electricity
3.     Raw material mixing and granulating are entirely automatic, human demand is small
4.     High-safety and can reduce raw materials' damage and deterioration
 
About our service:
PVC Cable Extruder Before-sale  
1.     Introduce products and applications detain
2.     Recommend suitable solution
3.     Provide with reference information
4.     Offer lab for test     
During Manufacturing          
1.     Provide with layout and engineering conditions
2.     Inform the project processing status
3.     Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information

Nitrate

Nitrate Hexahydrate,Strontium Nitrate,Nitrate High Purity,Aluminum Nitrate Nonahydrate

Vietnam Fine Chemical Factory , https://www.finechemvina.com