The category of armature assembly used in water Solenoid Valve.
1. The tube OD sizes range from 5mm to 23mm, big than 23mm is also available
2. The valve seat orifice sizes ranges from 0.6mm to 4.0mm and higher for special applications.
3. Choose the suitable material for the application as Brando offers plunger tubes in brass and stainless steel.
4. Spring: Rustproof SUS304 stainless steel, with good performance of restore.
5. Seals: Options of NBR, HNBR, FKM, EPDM, PTFE, food grade materials, welcome your other requirements.
6. Shading ring: Cooper and silver material available.
7. Washer and retaining nut provided if has demands.
Water Solenoid Valve Armature Assembly Water Solenoid Valve Armature Assembly,armature assembly for water solenoid valve,water solenoid valve repair kit,water solenoid valve rebuild kit NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com
For 8Tone cold refrigerator truck, front and rear twin disc.
Dimension: 345-10*44.6
We have developed over 700 models clutch disc assembly, diameter range from 160mm to 430mm, application covering all kinds of commercial vehicles, passenger cars and tractors. Our main products including Volvo truck, Benz truck, Scania, Man, HOWO and all kinds of Japanese vehicles We have invested advanced toolings technology from abroad, with CAD and CAM technology, our yearly production ability can be two million sets, and we are considered one important clutch disc manufacturer in China.
For commercial vehicles clutch plate, we had developed all kinds of products for auto type: Volvo truck, Mercedes Benz truck, Scania, Man, Renault, FIAT, Skoda, Iveco, HOWO, and all kinds of Korean and Japanese vehicles like Hyundai, Daewoo, Mitsubishi, Hino, Isuzu. Oil tank trucks, refrigerator truck, transport mixer, towing truck, dumper, self-dumping truck, fire fighting truck, heavy duty trucks, light trucks. The commercial vehicle clutch plate OD. Range from 275mm to 440mm.
According to the Automobile Dry Clutch Disc Assembly Bench Test Technique and Automobile Dry Clutch Disc Assembly Technology Qualification, our clutch disc products were tested and the results showed as follows:
1, Overspeed test: Continuously accelerating clutch disc rotation speed to 8000 RPM at 250 Centi degree, and keep speed for 5 Mins, no crack and damage on the clutch plate.
2, Fatigue test: The clutch plate maximum torque not less than 75% of primary data, after a 3.5X 106 recycle, friction damp torque not less than 60% of primary data;
3, Temperature increase test: Start the clutch plate 10 times, the average temperature less than 10 Centi degree.
4, Dynamic friction torque test: After clutch disc mating with the work surface, when contact surface over 80% at 1500 RPM, force friction disc slip to friction surface to 250Centi degree, the clutch disc unit dynamic friction torque not less than 0.3NM/CM2. The dynamic friction torque at 250Centi degree, not lower than 70% of value at room temperature.
5, Friction facing wearing rate test: After clutch disc assembly mating with the work surface, when contact surface over 80% at 1500 RPM, running the clutch plate 1X104 times, the friction surface wear rate not over 0.65mm, no crack, no bubble and no rivets exposed.
Clutch Disc for Mack Truck (Mack-3P)
Model NO.: Mack-3P
Working Mode: Power Combining
Working State: No linkage
Voltage: 0
Electromagnetic Clutch: 0
Trademark: Fricwel
Transport Package: Box+Pallet
Specification: GB/T 5764-1998
Origin: China
HS Code: 8708931
Mack-3P Clutch Disc