The air bath thermostatic shaker (also called the air thermostatic shaker) is a biochemical instrument combining a temperature-controllable constant-temperature incubator and an oscillator, and is mainly applicable to various large and medium-sized institutions, medical care, petrochemicals, and health and epidemic prevention. Environmental monitoring and other research departments are used for the cultivation of various liquid and solid compounds such as biological, biochemical, cell, and bacterial strains. Its main features: A: precise digital display of temperature control. B: There is a supplemental oxygen hole and a constant temperature working chamber is rich in oxygen. C: There is a mechanical timing. D: The universal spring test bottle holder is particularly suitable for the preparation of biological samples for various comparative experiments. E: Stepless speed regulation, stable operation, simple and safe operation. F: The inner cavity is made of stainless steel and has good corrosion resistance. Nine: bottling capacity: test tube: 16 × 300mm 100ml × 24, 200ml × 15 only Ten: Dimensions: 700 × 470 × 500mm 1. The working plane of the machine must not be excessively smooth (eg tiles, etc.). 1. Load the test bottle and keep it balanced. If it is a dual function model, set the oscillation mode. Strength Equipment,Gym Equipment,Strength Training Equipment,Hammer Strength Machine Foshan Laijian Fitness Equipment Co., Ltd. , https://www.gymljfitness.com
Gas bath constant temperature shaker - The main technical performance of gas bath constant temperature shaker:
First, use the power: 220V 50Hz
Second, heating power: 400w
Third, the timing range: 0 to 120 points (or normally open)
Fourth, the oscillation frequency: Start -300 rev / min, adjustable five, oscillation amplitude: 20mm
Six, constant temperature range: Room temperature -50 °C
VII. Oscillation method: Reciprocating, convolute and dual function 8: Temperature control accuracy: 1°C
Eleven: Special Tips: Add "A" to the model number for temperature, speed, double digital display bath, constant temperature shaker, air bath, constant temperature shaker:
2. The rated electrical parameters of the user-supplied outlet should not be less than the rated electrical parameters of the machine and have good grounding measures.
3. Do not use the unit in direct sunlight.
4. The speed control should start slowly from low speed to high speed.
5. The machine may have some displacement when it is oscillating at high speed, so it should be watched during use.
Air Bath Thermostatic Shaker - Air Bath Thermostatic Shaker Instructions:
2. Turn on the power and set the timer according to the scale on the surface of the machine. If you need to work for a long time, turn the timer to the “normally on†position.
3, Turn on the power switch and set the constant temperature temperature:
(1) Place the control switch in the “set†section. The temperature displayed on the display is the set temperature. Adjust the knob to set the desired temperature for your work. (The working temperature you set should be higher than the ambient temperature, at this time the machine starts heating, yellow indicator light, otherwise the machine does not work)
(2) Place the small switch of the control part at the “measurement†end. At this time, the temperature displayed on the display screen is the actual temperature of the air in the test box. As the temperature in the box changes, the displayed number will change accordingly.
(3) When heated to your desired temperature, the heating will automatically stop, and the green indicator light will be on. When the heat in the test box dissipates below the set temperature, a new round of heating will begin.
4, open oscillation device:
(1) Turn on the oscillation switch on the control panel and the indicator lights.
(2) Adjust the oscillation speed knob to the desired oscillation frequency.
5, the work is completed cut off the power, set the speed control knob and control knob to the lowest point.
6. Clean the machine and keep it clean.