·National 10% of vehicles are yellow-labeled vehicles that have not completed the elimination task

As of the end of September 2014, a total of 3.978 million yellow and yellow cars were eliminated nationwide, of which 635,500 were eliminated in September, and 66.3% of the 6 million vehicle elimination tasks were completed. The relevant person in charge of the Ministry of Environmental Protection informed the media about the progress of the elimination of yellow-label vehicles and old cars from January to September 2014. Among them, Beijing had 293,300 yellow-label vehicles in the first nine months of the year, and completed 75 of the year’s 391,000 elimination tasks. %.
According to the person in charge of 10% of the vehicles in the country, as of the end of 2013, there were more than 13 million yellow-label vehicles in the country, accounting for about 10% of the car ownership. The pollutants emitted accounted for 50% of the total pollutant emissions. About % is an important source of air pollution. In order to improve the quality of the atmospheric environment, the "2014 Government Work Report" proposed the task of "eliminating 6 million yellow-label vehicles and old vehicles". In May 2014, the General Office of the State Council issued the "2014-2015 energy-saving emission reduction and low-carbon development." The Action Plan will disintegrate 6 million yellow-label vehicles and old vehicles into 31 provinces (autonomous regions and municipalities), including 7 provinces and municipalities in key areas such as Beijing-Tianjin-Hebei, Yangtze River Delta and Pearl River Delta. There were 2.43 million old cars, accounting for 40.5% of the elimination tasks; the other 24 provinces (autonomous regions and municipalities) eliminated 3.57 million units, accounting for 59.5% of the elimination tasks.
It is understood that 18 provinces have introduced subsidy policies. In order to encourage early elimination, many provinces and municipalities have introduced incentive measures. In 18 provinces including Beijing, Shanghai, Shandong, Zhejiang, and Guangdong, the implementation plan or subsidy policy for the elimination of yellow-label vehicles and old vehicles was introduced. 84 cities at the prefecture level and above introduced subsidy policies, and the subsidy amount was up to 80,000 yuan. Car.
At the same time, the management of the yellow-label car is also tightened, the yellow-marker vehicle limit area is delineated, and the illegal vehicles are fined and deducted. Beijing has carried out quarterly inspections of yellow-label vehicles. All cities and counties in Hebei Province and highways have banned yellow-label vehicles. The Pearl River Delta, some cities in Shandong Province and Nanjing have already achieved electronic enforcement of yellow-label vehicles.
Many people have not completed the elimination task. The person in charge said that overall, the progress of this work is still uneven. At present, one third of the country’s elimination tasks are still not completed. Qinghai and Shandong have completed all elimination tasks ahead of schedule. Jiangsu, Shanxi, Tianjin, Liaoning, Jilin, Sichuan, Xinjiang, Beijing and other 8 provinces (cities, districts) have completed more than 75% of the total tasks; Guangdong, Chongqing, Zhejiang, Ningxia, Yunnan, Hunan and other six provinces (regions) completed less than 60% of tasks; Guangxi, Tibet, Hainan, Inner Mongolia, Hubei, Henan, Heilongjiang and other seven provinces (regions) were seriously lagging behind, completing less than 40% of tasks.

Rotary Tablet Press

Classification of tablet press: Models can be divided into single punch tablet press, rotary tablet press, sub-high speed rotary tablet press, automatic high speed tablet press and rotary core tablet press.

The sheet shape pressed by the tablet press is initially flat circular, and later developed into shallow circular arc and deep circular arc on both sides, which is for the need of coating. With the development of special-shaped tablet press, oval, triangle, oblong, square, diamond, circular ring tablets followed. In addition, with the continuous development of preparations, due to the requirements of compound preparations and timed release preparations, special tablets such as double layer, triple layer and core coating are made, which need to be completed on special tablet press.

Rotary tablet press is a machine which is made of several pairs of die distributed on the turntable to make a circular lifting movement according to a certain track and press the granular material into tablet through the press wheel. And the stamping rod with the rotary table rotating speed ≥60m/min line press is called high-speed rotary tablet press, this high-speed rotary tablet press has a forced feeding mechanism, the machine is controlled by PLC, has the automatic adjustment of pressure, control the weight of the piece, eliminate the waste piece, print data, display fault shutdown and other functions, in addition to the control of the weight difference within a certain range, Quality problems such as missing Angle and loose lobe can be automatically identified and eliminated.

With the development of market demand, the scope of application of tablet press is more and more wide, no longer simply limited to the suppression of Chinese and Western medicine tablets, more widely suppressed health food, veterinary medicine tablets, chemical tablets: such as mothballs, washing blocks, smurf blocks, art powder, pesticide tablets, food tablets: chicken essence block, isatis root block, divine Qu tea block, compressed biscuits.

Rotary Tablet Press,Tablet Press,Tablet Machine,Tablet Maker,Pill Machine

JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.machineryxuanteng.com