CO2 Welding Wire Production machine
WELDING WIRE DRAWING AND CUTTER MACHINE LINE
1-ROD WIRE PRETREATMENT(PAY OFF+DESCALER MACHINE+SAND BELT MACHINE)
2-ROUGH WIRE DRAWING MCHINE LZ560
3-HIGH SPEED STRAIGHTENER AND CUTTER MACHINE
4-THE FINISHED WIRE Φ2.50X350 Φ3.25X350 Φ4.0X450mm.
WE CAN MAKE THE WELDING WIRE ACCORDING TO THE BUYERS REQUIREMENTS
5.THE FIRST YEAR SERVICE INCLUDE THE SPAREPART IS FREELY SERVICE(BUT NOT INCLUDE THE BUYERS DELIBERATELY BREAKS THE MACHINE OR PARTS),THE SECOND AND THIRD YEAR JUST PAY THE PARTS COST.THE SELLER MUST OFFER THE LIFE-SERVICE FOR THE MACHINE LINE.
6.THE SELLER MUST GUARANTEE TO PRODUCE THE GOOD QUALITY FINISHED WELDING WIRE.
THE SELLER MUST OFFER THE ELECTRICITY MAP,TOUCH SCREEN,AND MANUAL BOOKS,MAINTAIN BOOKS,AND OTHER TECHNICAL DETAILS WITH ENGLISH.TRAIN THE BUYERS WORKERS TO MASTER THE MACHINE
7.SEA WORTHY PACKING, BIG MACHINES WRAPPED WITH PLASTIC NYLON, SMALL MACHINES AND PRECISION MACHINE MUST PACKED IN PLYWOOD BOXES THEN FIXED IN THE CONTAINER
LZ600 wire drawing machine
1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.
1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.
1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.
1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.
1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.
1. 6 Before starting the machine, check whether the safety device is normal.
1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.
1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.
1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.
The second Delivery inspection
2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.
2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.
2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.
CO2 welding Wire Production Line,Welding Wire Production Equipment Line,Production Line For Wire Barrel Packaging,Welding Wire Copper Plating Machinery=Proper(B10) Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
The industry believes that in the next five years, the penetration rate of LED lighting may exceed 80, and the development space is very large. The LED lighting industry should clearly understand its own situation. For now, the three major difficulties in the LED lighting industry are restricting the development of LED lighting companies.
When the policy of banned white came out, the LED lighting industry would welcome the spring again, and the enthusiasm in the industry would be like fire. This upcoming outbreak has not yet experienced a long time in the industry.
Pan Wenbo, chairman of Guangzhou Guangya Messe Frankfurt Co., Ltd. believes that there are currently more than 10,000 LED companies in China. In the next 5-8 years, 30-40 or even 50 enterprises will be eliminated, and the industry concentration will be higher and higher. At the same time, a number of outstanding companies will grow in the market.
According to statistics, the current penetration rate of LED lighting is only 20~30. The industry believes that the penetration rate of LED lighting may exceed 80 in the next five years, and the development space is very large. The upstream and downstream output value of LED lighting in mainland China last year was 350 billion yuan to 380 billion yuan. This year will reach 410 billion yuan to 450 billion yuan, and will exceed 100 billion yuan in the next five years. In Pan Wenbo's view: In the next five years, the domestic LED lighting industry will maintain a growth rate of 22~25 every year, and 80 traditional lighting will be replaced by LED lighting.
Three major problems restrict development Faced with such opportunities and challenges, the LED lighting industry should clearly recognize its own situation. For now, the three major difficulties in the LED lighting industry are restricting the development of LED lighting companies.
First, the reduction of operating gross profit is to establish the scale advantage. Some enterprises adopt the cost leading strategy, take the initiative to lower the price to rob the market share, and hope to establish a competitive threshold, forcing other brands to follow up the price reduction into a special way to promote the shipment, especially in T8. Tubes, bulbs, T5 brackets and other light source circulation categories are particularly fierce. Compared with the traditional lighting stage, the average gross profit margin of the industry has dropped significantly;
Second, the channel marketing expenses have been greatly improved to quickly build a marketing network. Some enterprises have invested in marketing expenses regardless of cost. Many marketing personnel have invested in various exhibition cabinets, sending samples, advertising, and distributing goods. These are not in the traditional lighting era. imagination.
Third, the hidden costs have increased substantially. In order to cooperate with the product switching, the company has continuously improved and enriched the product line, and the research and development costs have become larger. To meet the sales, the factory has to stock up, which will soon cause sluggish inventory, which will affect the company's cash. Flow, resulting in reduced efficiency of capital use. The increase in these hidden costs has made it difficult for companies to achieve their own blood-forming development.
Adjusting the state to return to rationality Faces such a dilemma, if an enterprise wants to win in the competition, it must first have a strong strategic system planning capability and form a correct competitive thinking mode. Secondly, it must be in product planning, channel construction, production management, etc. Have strong operational capabilities to avoid uncertainty in the execution of the target.
Therefore, enterprises will eventually return to a state of rationality.
First, abandoning strategic loss thinking in thinking, this kind of price does not hesitate to sell at the bottom price, and it is not advisable to invest a large amount of marketing cost thinking mode. Especially for some listed companies, when the stock market price pressure is high, it is difficult to better The mentality is to insist on strategic losses, and if you are not careful, you will get deeper and deeper in the swamp of loss.
Second, it can be cut in from a field where competition is relatively small and its own capabilities are strong. Enterprises can adopt a focused strategy, including product focus, channel focus, and regional focus.