3.0 Ton Spider Crane
specifications 2.98t Maximum working radius 8.8m×0.25t Maximum elevation on the ground 9.2mX 1t Maximum underground elevation 10mX1t (4 rope) 20mX1t (2 rope) 40mX0.74t (1 rope) Roll up device Lift hook up speed 0-8m / min (4 rope) Steel wire rope specifications Φ10mm×50m retractor device Hanging arm form 5-section boom, pentagonal structure Hanging arm length / time 3.1m-9.2m/20sec Up and down device Arm angle / time 0-78
Hubei Ruiyate Automobile co.,ltd., located in the famous ancient "bells" music of the township, the capital of special vehicles -- draws in hubei province. Suizhou is located in the north of hubei province, the Yangtze river and the huaihe river interchange, east ChengWuHan, xiangyang, xinyang in the north west, south of jingzhou, the throat "" surf, the conjugate JingYu han. Suizhou is "north ordos town", "north gate" opening to the outside world, hubei province, is the national implementation of the western development strategy important relay station and transfer station from east to west. 3.0 Ton Spider Crane,Spider Crane Truck,3Ton Spider Crane Truck,5 Section Spider Crane Truck Hubei ruiyate Automobile Co.,Ltd , https://www.ruiyateworkingtruck.com
This company mainly produces and sales overhead working truck series, the series of modern municipal engineering, pavement maintenance work series, the series of RV. The products sell well both at home and abroad, and the market prospect is very broad, at the same time cater to the development trend of special vehicles in our country.
Valve body type selection
There are many types of regulating valve body, commonly used through a single seat, through two-seater, angular, diaphragm, small flow, tee, eccentric rotation, butterfly, sleeve, spherical and so on. In the specific choice, the following considerations can be made: (1) The shape of the valve spool is mainly based on the selected flow characteristics and unbalanced forces and other factors to consider. (2) Abrasion resistance When the fluid medium is a suspension containing high concentration of abrasive particles, the internal material of the valve should be rigid. (3) Corrosion Due to the media corrosive, try to choose a simple structure of the valve. (4) Medium temperature, pressure When the medium temperature, high pressure and changes, should use the valve core and valve seat material by temperature, pressure changes in small valves. (5) to prevent flash and cavitation flash and cavitation only produce liquid medium. In the actual production process, flash and cavitation will form vibration and noise, shorten the life of the valve, so the valve should be selected to prevent flash and cavitation.