Combining equipment for spot inspections and repairs, carrying out simple diagnostics on major production equipment, on-line monitoring and management of key equipments, maintenance of state equipment, proneness to managing fault-deterioration curves, drawing of mine-breaking equipment status management, and comprehensive diagnosis of rotary equipment faults, cone-crusher fault diagnosis, Predict breakdown cycle of the ore-breaking equipment, analyze failure modes, and master probability of failure. Early detection of potential equipment failures, development of maintenance decisions, and the realization of equipment maintenance. In recent years, the failure rate has risen, and common failures and unexpected failures have increased year by year with the increase in the number of years of use. Maintenance is difficult, maintenance costs are high, and equipment performance is declining year by year. The current situation of the cone cone gear cone crusher The cone cone crusher is the main production equipment of Lingxiang iron mine. Failure mode horizontal axis shaft sleeve glue, transmission and size bevel gear wear and broken teeth, large copper sleeve gap increase, spherical S-shaped W-rail injury and internal motor failure. Cone Crusher Fault Diagnosis Model Analysis Fault Diagnostic Procedure Cone Crusher Fault Diagnosis Procedure Established See Diagram Diagnostic Procedure Steps to Establish Diagnostic Site Use a cone crusher as an example. The equipment detection point indicates that the monitoring part is the transmission assembly and the measurement parameter is the vibration speed. The online monitoring and diagnostic analysis of equipment shows that the analysis results of the on-line monitoring data of the cone crusher are listed in the table. The fluctuations and rules of the equipment fault, the four monitored data all fluctuate, and the water pressure fluctuation range is large, indicating that the equipment failure is not Independent existence is the internal structure of the host. Three equipment number measuring point vibration speed spectrum analysis results é¢ rate equipment number three side of the intestine to the crusher equipment status display chart table equipment gear meshing vibration speed test table frequency equipment number number measurement point at the same time rise. Host internal failure is a complex factor. Therefore, the key points were monitored and the frequency spectrum was used for precision testing and analysis. Low-temperature Tube and Precision Tube Low-Temperature Tube And Precision Tube,Low-Temperatube Tube,Precision Steel Tube,Precision Steel Pipe Hydrogrand Steel Pipe Co.,ltd , https://www.hydrograndtube.com